Forlinx Embedded Tech. Co. Ltd
|
Price: | 250.0 USD |
Payment Terms: | T/T,Paypal |
Place of Origin: | Hebei, China (Mainland) |
Add to My Favorites | |
HiSupplier Escrow |
Hardware Interface | Spec. |
Dimensions | 130mm x 190mm |
Layer | 4-layer |
Power Jack | 12V |
LCD | 7-inch capacitive LCD |
LVDS | Dual-ch 8bit LVDS interface(2mm pitch) |
HDMI | 1-ch HDMI1.4(HDMI-A socket) |
SD Card | 1-ch, compatible with SD, SDHC and SDXC card, support up to 32G SDHC card |
Debug Port | 1-ch, micro USB interface, with on-board USB to TTL chip |
Serial Port | 3-ch( two 3-wire,one 5-wire), TTL/232 optional, TTL(default) |
USB Host | 2-ch USB2.0 USB HOST |
USB OTG | 1-ch USB2.0 USB HOST |
RS485 | 1-ch RS485( Multiplexed with UART2) |
A/D | 4-ch resistive touch |
IIC | 2-ch |
Audio | 2-ch, 1-ch stereo headphone jack, 1-ch mono microphone jack, two 3.5mm standard stereo jack, 2 speaker interface(XH2.54-2P) |
Boot mode Switch | DIP switch for eMMC boot |
Reset | Supported |
Ethernet | 1-ch Gbps Ethernet interface |
CAN | 1-ch |
PWM | 1x PWM for backlight |
RTC | 1x RTC |
SPI | 1x SPI |
SATA | 1x SATA(a 3.5'' hardware works with 12V power adapter, when base board is supplied by battery, it could only work with 2.5'' hardware) |
3G Module(expandable) | 1x 3G module with mini-PCIE interface, the SIM card slot is on the back of base board |
WIFI&Bluetooth(expandable) | 1x WIFI&bluetooth, RealTek RTL8723AS Combo module, IEEE802.11 b/g/n 2.4GHz, 1 T1R WIFI with bluetooth v2.1+EDR/Bluetooth3.0/3.0+ HS/4.0 |
Li-battery | 2x li-battery port with PMU |
IrDA | 1x IrDA |
Gravity Sensor | 3-axis accelerator sensor |
Processor | CPU | i.MX6 Quad |
CPU Architecture | ARMv7 | |
CPU Main Frequency | 4*1.2GHz | |
CPU Operating Temp | -20-105℃( For commerical application) -40-105℃( For industrial application) -20-105℃( For vehicle application) | |
Memory | RAM | 1G DDR3 |
eMMC | 8GB eMMC | |
PMU | MCIMX6Q6AVT10AC | |
Physical Features | Dimension | 60mm x 60mm |
Voltage | 4.2V | |
Graphical Processor | VivanteGC2000 | |
CPU Module Pins | 220pin, 1mm pitch | 55pin×4,stamp hole |